Options

Power of Comparison

Vortex Titan Slide Gate vs. Alternatives

The Vortex® Titan Slide Gate™ provides significant advantages over alternative roller-supported slide gates:

• Many alternative roller-supported slide gates rely on soft rubber seals which are directly exposed to the material flow stream. These seals rapidly erode or tear away in service. Others rely on bonnet packing, which can relax and allow material packing in the bonnet area. These deficiencies promote leakage of materials and dusts past the gate and to atmosphere, in addition to actuation issues and several other maintenance concerns. The Titan Slide Gate addresses these issues by incorporating "live loaded" hard polymer bonnet seals and side seals. Hard polymer provides greater wear resistance and longer service life than alternative sealing materials. The hard polymer seals are "live loaded" with compressed rubber backing to ensure even as the polymer experiences frictional wear from many actuations over time, the rubber load seals continuously force the polymer seals against the sliding blade. When equipped with a Special Service Inlet, the seals and rollers are also shielded from the material flow stream, to protect them from abrasion. This design maintains the gate's positive seal of materials/dust-tight seal with infrequent maintenance intervention.

• If materials and dusts begin to migrate and collect in the gate's bonnet area, it indicates that the gate's bonnet seals have partially worn and the compression load is lessened, causing the seals to no longer be forced against the sliding blade as they should be. With this maintenance indication, the Titan Slide Gate features access slots on each side of the gate that allow bonnet seal replacement while the gate remains in-line. Using simple tools, new bonnet seals are driven into one access port as the worn bonnet seals are simultaneously ejected on the other side of the gate, through the opposite access port.

• Many alternative slide gates allow metal-on-metal sliding, which creates galling. This causes a gate to seize and bind, and can create foreign metal fragment contamination. The Titan Slide Gate's hard polymer seals eliminate metal-on-metal contact to resolve each of these concerns.

• Many alternative roller-supported slide gates have open cavities where materials can wedge and prevent positive material shut-off. Wedging can also create seal wear and material degradation, and cause a gate to seize and bind. Wedged materials also create risk for cross-contamination and spoilage. To prevent wedging and ensure positive gate closure, the Titan Slide Gate's sliding blade is designed to mechanically clear materials away from the sealing surfaces with each actuation. With each closing stroke, the Titan Slide Gate mechanically self-cleans its side seals. With each opening stroke, the gate's bonnet seals prevent the blade from carrying materials back into the bonnet area. Both of these considerations ensure migrant materials are forced back out of the seals and are discharged into the process line, rather than packing in the seals and causing actuation issues.

• Many alternative slide gates pack materials into an end seal, preventing positive closure. This promotes material leakage through the valve, can cause blade damage, and can cause other actuation issues. In the Titan Slide Gate, the leading edge of the sliding blade is beveled. The gate is also designed with a displacement pocket, rather than a true end seal. Both of these features ensure that materials remaining at the leading edge of the blade can fall away into the process line below, rather than packing into an end seal.