Exit
Use the search bar above for Site Contents, Instruction Manuals, and Product IDs.
To Top

TITAN SERIES

TPV

The Vortex® Temperature & Pressure Valve™ (TPV)'s unique "rising blade" is designed to close into an end seat. This provides an optimal seal of high pressures and a positive material shut-off.

Ideal application: Higher-temperature and/or higher-pressure applications handling highly abrasive dry bulk solid materials. The Vortex® Temperature & Pressure Valve™ often replaces deficient slide gates and butterfly valves used in such environments.

Watch video
View Photos
A Quantum Orifice Gate Valve from Vortex

Key Features

  • Replaceable packing gland for in-line maintenance

  • Spring-loaded blade guides for positive gate closure

  • Air gap between the valve body and actuator to reduce heat transfer into the cylinder

  • Beveled blade prevents material packing into the end seat

  • Positive seal of materials & dusts across the closed blade and to atmosphere

  • Blade & seats constructed from 440 C stainless steel(Rockwell Hardness 60 C)

  • Ductile iron housing for operator safety in high temperature applications

  • For temperature resistance, constructed without elastomers or polymers

  • Narrow profile for limited space applications

Replaceable packing gland for in-line maintenance
Spring-loaded blade guides for positive gate closure
Air gap between the valve body and actuator to reduce heat transfer into the cylinder
Beveled blade prevents material packing into the end seat

Tech Specs

Model No.

TPVXX

Conveyance Type

Gravity flow, dilute phase and dense phase pneumatic conveying applications. Can handle differential pressures up to 100 psig | 6.8 barg | 0.69 MPa, depending on gate size. Can be used in pressure or vacuum systems.

Materials Handled

Heavy-duty and/or abrasive dry bulk solid materials

Standard Sizes

2 – 10 in | 50 – 250 mm
Contact us for custom sizes

Opening

Available in round sizes.

Overall Height

2 – 3 in | 50 – 75 mm

Weight

45 – 250 lb | 20 – 115 kg

Flange Options

ANSI #125/150, DIN PN10

Material Temperatures

Up to 660° F | 350° C

Body/Frame Construction

Cast ductile iron

Material Contact Construction

440C stainless steel (Rockwell Hardness 60 C) & ductile iron

Seat Construction

440C stainless steel (Rockwell Hardness 60 C)

Drive/Actuation

Double-acting air cylinder

Position Confirmation

Magnetic reed, proximity or mechanical limit switches

Material Flow Controls

AVP -  Learn More >

Required Accessories

Sealed body air purge

Compliance

ATEX Zone 20 (internal), ATEX Zone 21 (external)

Power of Comparison

Vortex Temperature & Pressure Valve vs. Alternatives

• Many alternative slide gates and butterfly valves rely on seals which are directly exposed to the material flow stream. These seals rapidly erode or tear away in service. This deficiency promotes leakage of materials and dusts past the gate and to atmosphere, in addition to actuation issues and several other maintenance concerns. To address these issues, the Vortex® Temperature & Pressure Valve™ (TPV) is designed without polymer or elastomer seals. This ensures the gate's seal is not compromised by extreme pressure, temperature or abrasion. This design maintains the gate's positive seal with infrequent maintenance intervention.

• Many alternative slide gates pack materials into an end seal, preventing positive closure. This promotes material leakage through the valve, can cause blade damage, and can cause other actuation issues. Upon gate closure, the TPV's sliding blade "rises" upward into a seat, rather than a true end seal, so that materials remaining at the leading edge of the blade can fall away into the process line below, rather than packing into an end seal. This design provides a better seal of materials and dusts in high pressure applications.

• A butterfly valve's rotating disc is directly exposed to the material flow steam, which creates wear to the disc itself. The exposed disc also disrupts convey line pressures and obstructs material flow as they pass through the valve, which can cause line plugs and other maintenance concerns. To resolve these issues, when the TPV is open, its sliding blade is recessed to create an unobstructed opening that maintains convey line pressure and allows unrestricted material movement.

• The TPV features spring-loaded blade guides along the full stroke of the gate to ensure the blade is kept in constant contact with the seals throughout each actuation. The blade guides also assist in “lifting” the blade into its end seat. This design ensures the gate’s positive seal of materials and dusts over time. The TPV also features an additional spring-loaded blade guide that runs perpendicular to the sliding blade. This strengthens the center of the blade to further ensure the gate’s positive seal.

• In high pressure applications, the TPV’s required air purge assembly is essential to keeping fine materials in the flow stream and out of the body of the valve.

Join our newsletter and receive Vortex news & updates in your inbox.

Success! Thank you for subscribing.
Oops! Something went wrong while submitting the form.
Vortex Companies
Salina Vortex Corporation © Copyright 2022 - All Rights Reserved